HOW TO : the row effect
Publié : ven. sept. 14, 2018 6:20 pm
Pour ramer efficacement il faut jouer avec le row. Lorsque vous ramez d’un côté de la planche, celle-ci tourne vers l’autre côté.
Ceci s’appelle le row.<
Cette tendance naturelle et logique peu devenir vraiment gênante si on ne la maitrise pas. Le shape de la planche influence beaucoup cette tendance :
- Plus une planche est courte plus elle a de row car la longueur cale la planche dans l’axe en créant des résistances à la rotation à plat.
- Plus elle est large au maître bau plus elle aura de row car cela crée un point de pivot central et diminue le rapport longueur/largeur. Ce rapport conditionne totalement le row.
- Plus elle a de rocker, plus elle a de row car cela crée un point de pivot vertical qui allège les extrémités et diminue la résistance à la rotation aux extrémités.
- Plus elle a de volume, plus elle a de row car la planche est plus au dessus de l’eau et offre moins de résistance à l’effort de rotation.
- Plus l’arrière est large, moins le row est important car plus la ligne d’outline entre le maitre bau et l’arrière est parallèle à l’axe médian, plus la résistance à la rotation est forte.
- Plus l’arête de plan de rail est haute et plus le row est important car là encore cela diminue la résistance à l’effort de rotation.
- Il est évident que plus les dérives sont profondes et moins le row est important.
- L’utilisation d’une pagaie trop longue augmente fortement le row.
La combinaison de tous ces paramètres doit être très précise pour obtenir un bon shape. De même, le surfer doit bien intégrer des paramètres avant d’acheter un SUP car si le row peut être pénible, il faut savoir que tout ce qui diminue le row diminue d’autant la maniabilité de la planche.
Il s’agit donc de s’orienter vers un mélange très subtil de tous ces facteurs pour obtenir la planche qui aura le comportement recherché. Il faut donc s’adresser à des shapers expérimentés dans le domaine du SUP car ces paramètres sont très peu maniés par les shapers de planches de surf.
La technique de rame joue considérablement sur le row.
Il faut réussir à dissocier totalement le haut du corps qui produit l’effort de rame de manière asymétrique et le bas du corps qui transmet cet effort à la planche. Par ce biais on peut vraiment réussir à ramer fort d’un côté sans que la planche ne change de direction en deux coups de pale. Le bassin doit donc corriger l’effet de rotation.
For efficient rowing you need to play with the Row. When you row off one side of the Board, it will turn towards the other direction.
This is called the Row.
This logical and natural tendency can become really annoying if it is poorly mastered. The Boards Shape has a big influence on this:
- The Shorter the Board the more Row she’ll have because the length puts the Board in the axis by creating resistance to flat rotation.
- The larger the Wide Point the more Row you’ll have because it creates a central pivot point and diminishes the rapport of Length/Width. This rapport completely conditions the Row.
- The more Rocker you have, the more Row as well because it creates a vertical pivot point the frees up the ends and decreases the resistance to rotation at the nose/tail.
- The more volume the Board has the more Row because the Board is less underwater which creates less resistance to the rotational effort.
- The bigger the tail, the less Row you’ll have because the more the line of outline between the medium point and the back is parallel to the median axis, the stronger the resistance to rotation.
- The higher the rail plan edge, the more greater the Row is because it reduces the resistance to the rotational force.
- It is self evident that the deep the Fins are the less Row you will have.
- Using a Paddle that is to long heavily augments the Row effect.
- The combination of all these parameters need to be very precise to obtain a good Shape. At the same time, a Surfer needs to seriously take into account these parameters before buying a SUP because the Row can be a point of frustration, and one needs to now that all the things that diminish the Row also has a bad effect on the maneuverability of the Board.
So one must orient themselves towards a subtle blend of all these factors that will give them what they are looking for. So you must, above all, get yourself real advice from experienced Shapers in the field of SUP because these parameters are of no concern to Surfboard Shapers.
The Paddling Technique itself has a considerable affect on the Row.
One must arrive at a point of completely disassociating the top part of the body, that produces an asymmetric rowing effort, and the bottom half of the body that transmits this effort to the Board. In this way we can really manage to do some hard rowing off one side without the Board changing directions after two paddle swipes. The pelvis must correct the rotation effort.
Advisor : Patrice Guénolé et GONG Surfboards.
Ceci s’appelle le row.<
Cette tendance naturelle et logique peu devenir vraiment gênante si on ne la maitrise pas. Le shape de la planche influence beaucoup cette tendance :
- Plus une planche est courte plus elle a de row car la longueur cale la planche dans l’axe en créant des résistances à la rotation à plat.
- Plus elle est large au maître bau plus elle aura de row car cela crée un point de pivot central et diminue le rapport longueur/largeur. Ce rapport conditionne totalement le row.
- Plus elle a de rocker, plus elle a de row car cela crée un point de pivot vertical qui allège les extrémités et diminue la résistance à la rotation aux extrémités.
- Plus elle a de volume, plus elle a de row car la planche est plus au dessus de l’eau et offre moins de résistance à l’effort de rotation.
- Plus l’arrière est large, moins le row est important car plus la ligne d’outline entre le maitre bau et l’arrière est parallèle à l’axe médian, plus la résistance à la rotation est forte.
- Plus l’arête de plan de rail est haute et plus le row est important car là encore cela diminue la résistance à l’effort de rotation.
- Il est évident que plus les dérives sont profondes et moins le row est important.
- L’utilisation d’une pagaie trop longue augmente fortement le row.
La combinaison de tous ces paramètres doit être très précise pour obtenir un bon shape. De même, le surfer doit bien intégrer des paramètres avant d’acheter un SUP car si le row peut être pénible, il faut savoir que tout ce qui diminue le row diminue d’autant la maniabilité de la planche.
Il s’agit donc de s’orienter vers un mélange très subtil de tous ces facteurs pour obtenir la planche qui aura le comportement recherché. Il faut donc s’adresser à des shapers expérimentés dans le domaine du SUP car ces paramètres sont très peu maniés par les shapers de planches de surf.
La technique de rame joue considérablement sur le row.
Il faut réussir à dissocier totalement le haut du corps qui produit l’effort de rame de manière asymétrique et le bas du corps qui transmet cet effort à la planche. Par ce biais on peut vraiment réussir à ramer fort d’un côté sans que la planche ne change de direction en deux coups de pale. Le bassin doit donc corriger l’effet de rotation.
For efficient rowing you need to play with the Row. When you row off one side of the Board, it will turn towards the other direction.
This is called the Row.
This logical and natural tendency can become really annoying if it is poorly mastered. The Boards Shape has a big influence on this:
- The Shorter the Board the more Row she’ll have because the length puts the Board in the axis by creating resistance to flat rotation.
- The larger the Wide Point the more Row you’ll have because it creates a central pivot point and diminishes the rapport of Length/Width. This rapport completely conditions the Row.
- The more Rocker you have, the more Row as well because it creates a vertical pivot point the frees up the ends and decreases the resistance to rotation at the nose/tail.
- The more volume the Board has the more Row because the Board is less underwater which creates less resistance to the rotational effort.
- The bigger the tail, the less Row you’ll have because the more the line of outline between the medium point and the back is parallel to the median axis, the stronger the resistance to rotation.
- The higher the rail plan edge, the more greater the Row is because it reduces the resistance to the rotational force.
- It is self evident that the deep the Fins are the less Row you will have.
- Using a Paddle that is to long heavily augments the Row effect.
- The combination of all these parameters need to be very precise to obtain a good Shape. At the same time, a Surfer needs to seriously take into account these parameters before buying a SUP because the Row can be a point of frustration, and one needs to now that all the things that diminish the Row also has a bad effect on the maneuverability of the Board.
So one must orient themselves towards a subtle blend of all these factors that will give them what they are looking for. So you must, above all, get yourself real advice from experienced Shapers in the field of SUP because these parameters are of no concern to Surfboard Shapers.
The Paddling Technique itself has a considerable affect on the Row.
One must arrive at a point of completely disassociating the top part of the body, that produces an asymmetric rowing effort, and the bottom half of the body that transmits this effort to the Board. In this way we can really manage to do some hard rowing off one side without the Board changing directions after two paddle swipes. The pelvis must correct the rotation effort.
Advisor : Patrice Guénolé et GONG Surfboards.