Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Avatar de l’utilisateur
Crafter
Messages : 3703
Inscription : mar. juin 12, 2007 9:53 pm
Localisation : Pornichet
Contact :

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par Crafter » mar. nov. 15, 2016 11:13 am

Lancement des nouvelles Outlaw Pro 2017 :

Image

Image
GONG Moderator...

Avatar de l’utilisateur
Crafter
Messages : 3703
Inscription : mar. juin 12, 2007 9:53 pm
Localisation : Pornichet
Contact :

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par Crafter » mar. nov. 15, 2016 11:16 am

MagW a écrit :I have actually been wondering if this board in size 9' could be something for me to use in 30-40kts of wind and 1-3,5 m waves. We need something to get out through the strong wind and white water (lying down or sitting on knees), and the longboard noses we have push to much water. The Cloud noses are better than the longboards but shorter Clouds I have used are not very fast in the takeoff. The Curves are not ideal either.

In the takeoff we need speed for the drop and Outlaws are fast. The best alternative that I can imagine would be the Zero 9 SP, or? But Zero SP is only 68cm wide which in quite tricky in strong winds. Have anyone tried these boards, except for Xavier?
Hi Magnus,

I think the new 9'0 Outlaw could meet your expectation. Tail and nose are wider compare to the XTR shape for more stability on choppy water and windy days.

Cheers
GONG Moderator...

Avatar de l’utilisateur
MagW
Messages : 1270
Inscription : lun. sept. 17, 2012 9:57 pm
Localisation : Sweden west coast

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par MagW » mer. nov. 16, 2016 8:24 pm

This is good news!
I wonder if it is very slow to get started in the takeoff and accelerate with almost 29cm rocker? According to the pictures on the 10' 2016 there is quite a lot of nose rocker but the planing area is flatter, which makes it faster, or?
/Magnus
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5

1fox
Messages : 37
Inscription : mar. mars 15, 2016 12:11 am

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par 1fox » mar. févr. 27, 2018 3:55 pm

Hello,

Anyone has a (side) photo of the 10' Outlaw 2016 where the rocker amount can be perceived?
I was thinking about a use in big (not huge) conditions.

Can you explain how is the total rocker referred in the "Fiche technique" calculated?

Merci,

Avatar de l’utilisateur
MagW
Messages : 1270
Inscription : lun. sept. 17, 2012 9:57 pm
Localisation : Sweden west coast

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par MagW » mar. févr. 27, 2018 7:45 pm

/Magnus
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5

Avatar de l’utilisateur
coolas
Messages : 14930
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par coolas » mer. févr. 28, 2018 9:05 am

1fox a écrit : Can you explain how is the total rocker referred in the "Fiche technique" calculated?
board flat against a ruler, near the center, the height of the nose and tail tips are added.

Note that the rocker of the outlaw is closer to a Cloud of the same size than a Curve (between the 2). So, not an extreme rocker, it should paddle quite well.
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

1fox
Messages : 37
Inscription : mar. mars 15, 2016 12:11 am

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par 1fox » mer. févr. 28, 2018 10:00 pm

MagW a écrit :Here you have some pictures:
http://gongsupshop.com/epages/box1707.s ... LAW10CNOKZ
Hi Magnus,

Thank you for the link!
The board in the boutique photos is the 9'0, so it's not that accurate regarding nor the 10' rocker neither rail thickness (both boards are 120lts so I'm expecting the ten footer to be more refined).

Is Xavier riding the 10' on the two first pics ( riding the wall on a left )?

Sent from my SM-T825 using Tapatalk
Dernière modification par 1fox le mer. févr. 28, 2018 10:21 pm, modifié 1 fois.

1fox
Messages : 37
Inscription : mar. mars 15, 2016 12:11 am

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par 1fox » mer. févr. 28, 2018 10:15 pm

coolas a écrit :
1fox a écrit : Can you explain how is the total rocker referred in the "Fiche technique" calculated?
board flat against a ruler, near the center, the height of the nose and tail tips are added.

Note that the rocker of the outlaw is closer to a Cloud of the same size than a Curve (between the 2). So, not an extreme rocker, it should paddle quite well.
Hi Coolas,

Thank you for the explanation.

Although the winter brings some big waves to my local point break, where a semi gun would be very useful, this is not Nazare :)
In fact ,the 9' is more suited but I think it's too thick.

Having said that, the "B side" of the 10' is tempting me:
"Même si en dessous de deux bonhommes de face elles sont des cruisers sympas...". A none exaggerated rocker is in fact a plus.



Sent from my SM-T825 using Tapatalk

Avatar de l’utilisateur
coolas
Messages : 14930
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: Tout savoir sur les Outlaw Pro XTR 2016 et Pro 2017

Message par coolas » mar. janv. 23, 2024 11:17 am

Pour info, je tombe sur une Outlaw pro à 250€... au cas où il y aurait des intéressés, ces planches sont rares en occase:

https://www.leboncoin.fr/sport_plein_air/2482201250.htm
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

Répondre

Revenir à « "Tout savoir sur les planches rigides", les sujets officiels »