GONG Foils 2018
Re: GONG Foils 2018
Hello Ours
Could you tell me which are the most suitable elements of your foil product range to use them for windfoil? Please, indicate concrete fuselage, mast and wing sizes.
I want to use in low wind (10-15 knots) with small sails (5-5,5 m2). i prefer planning earlier than more speed. I prefer short mast for easier beach start. I weight 70 kg, and my wind foil board would be a 120 litres freeride with tuttle box.
Thanks. Regards.
Could you tell me which are the most suitable elements of your foil product range to use them for windfoil? Please, indicate concrete fuselage, mast and wing sizes.
I want to use in low wind (10-15 knots) with small sails (5-5,5 m2). i prefer planning earlier than more speed. I prefer short mast for easier beach start. I weight 70 kg, and my wind foil board would be a 120 litres freeride with tuttle box.
Thanks. Regards.
Re: GONG Foils 2018
Salut
Qu 'apporte.un stabilisateur de 55cm avec une aile avant de 100?
Plus de stabilité laterale?
Moins de vitesse?
Merci pour vos reponses.
Qu 'apporte.un stabilisateur de 55cm avec une aile avant de 100?
Plus de stabilité laterale?
Moins de vitesse?
Merci pour vos reponses.
9.3 androgéne , 8 acidolly,CM9,CM14, 8.4 curve,6 zuma, allvator xxl,xl, lt,curve,wing 9,7,5,4,foil v1,v2
- Ours
- Site Admin
- Messages : 19800
- Inscription : mar. juin 12, 2007 11:50 am
- Localisation : La Baule / France
- Contact :
Re: GONG Foils 2018
Hello,
plus de portance
plus de pied avant tout droit et plus de pied arrière dans les courbes
plus de stabilité dans tous les axes
moins de Vmax
moins rapide en pomping mais bien plus facile et plus de distance entre chaque pump
Merci.
plus de portance
plus de pied avant tout droit et plus de pied arrière dans les courbes
plus de stabilité dans tous les axes
moins de Vmax
moins rapide en pomping mais bien plus facile et plus de distance entre chaque pump
Merci.
GONG owner and shaper
Re: GONG Foils 2018
Hello,
I received two washers with each of 4 screws + brass parts.
Should I put both of them on a screw when I mount a foil to my board or are additional washers there just as a spare parts?
Are there some instructions mentioning this info?
(Same as here https://www.gong-galaxy.com/en/product/ ... p-plate-2/)
Thanks
I received two washers with each of 4 screws + brass parts.
Should I put both of them on a screw when I mount a foil to my board or are additional washers there just as a spare parts?
Are there some instructions mentioning this info?
(Same as here https://www.gong-galaxy.com/en/product/ ... p-plate-2/)
Thanks
Rider: 72 kg
Board: Gong Lethal 4'6'' 65l
Wings: Ullman Osprey 3.2, Ensis Score (3.5, 4.5 & 6.2), RRD Evo 5.5
Foils: Fluid (H M, T XXL & XLS), Curve XL; stabs: Curve 46, Fluid (43 & H 42)
Experience: Windsurf, Landkite, Wing foil
Board: Gong Lethal 4'6'' 65l
Wings: Ullman Osprey 3.2, Ensis Score (3.5, 4.5 & 6.2), RRD Evo 5.5
Foils: Fluid (H M, T XXL & XLS), Curve XL; stabs: Curve 46, Fluid (43 & H 42)
Experience: Windsurf, Landkite, Wing foil
- hecub
- Messages : 2495
- Inscription : lun. mai 05, 2014 3:13 pm
- Localisation : Ambassadeur Auray
- Contact :
Re: GONG Foils 2018
You can use only one on Gong boards. The only one I used two was the HIPE and its less deep rails.
Surf: Lethal foil 4'6
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube
Re: GONG Foils 2018
Thanks.
Rider: 72 kg
Board: Gong Lethal 4'6'' 65l
Wings: Ullman Osprey 3.2, Ensis Score (3.5, 4.5 & 6.2), RRD Evo 5.5
Foils: Fluid (H M, T XXL & XLS), Curve XL; stabs: Curve 46, Fluid (43 & H 42)
Experience: Windsurf, Landkite, Wing foil
Board: Gong Lethal 4'6'' 65l
Wings: Ullman Osprey 3.2, Ensis Score (3.5, 4.5 & 6.2), RRD Evo 5.5
Foils: Fluid (H M, T XXL & XLS), Curve XL; stabs: Curve 46, Fluid (43 & H 42)
Experience: Windsurf, Landkite, Wing foil