HOW TO : make the upper hole on the Allvator Front Wing
HOW TO : make the upper hole on the Allvator Front Wing
Pour ceux qui sont équipés d'une Front Wing PRO ou Classic, voici une vidéo vous montrant, étape par étape, comment réaliser le perçage supérieur pour ajouter une vis au dessus du fuselage, comme sur les Front Wing PRO Clear. Le gain de rigidité est énorme. Rien ne bouge, ne se tord ou ne vibre.
For those who are equipped with a ALLVATOR Front Wing PRO or Classic, here is a video showing you, step by step, how to make the upper hole to add a screw on top of the Fuselage, as on the Front Wing PRO Clear. The gain in rigidity is serious. Nothing moves, twists or vibrates.
For those who are equipped with a ALLVATOR Front Wing PRO or Classic, here is a video showing you, step by step, how to make the upper hole to add a screw on top of the Fuselage, as on the Front Wing PRO Clear. The gain in rigidity is serious. Nothing moves, twists or vibrates.
Re: HOW TO : make the upper hole on the Allvator Front Wing
merci
Alley 8
-CM 11'6 - surf couine 8
- Lemon milf 5, cruzader 6
-neutra upe 3,5/4/4,5 Droid upe 5,
98 vip ambassadeur
-CM 11'6 - surf couine 8
- Lemon milf 5, cruzader 6
-neutra upe 3,5/4/4,5 Droid upe 5,
98 vip ambassadeur
- speed85
- Messages : 2161
- Inscription : ven. nov. 09, 2007 6:40 pm
- Localisation : mogette city, ambassadeur ! 86 kg
Re: HOW TO : make the upper hole on the Allvator Front Wing
top !!
10' couine Inflatable , zuma 6'6eps , matata 3cs eps, 6'5 couine marie , Allvator foil M/XL PRO
6'3 karamba eps , 5'11 pie eps, 5'9 alu pu, 5'6 alu fsp
6.8 unik
6'3 karamba eps , 5'11 pie eps, 5'9 alu pu, 5'6 alu fsp
6.8 unik
Re: HOW TO : make the upper hole on the Allvator Front Wing
let's do this!!
- hecub
- Messages : 2528
- Inscription : lun. mai 05, 2014 3:13 pm
- Localisation : Ambassadeur Auray
- Contact :
Re: HOW TO : make the upper hole on the Allvator Front Wing
C'est rigolo, dans la vidéo, Beryl ne fait pas le trou au même endroit que sur les Curve.
Surf: Lethal foil 4'6
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube
Re: HOW TO : make the upper hole on the Allvator Front Wing
hole not in the same place?
Mmmm is that so?
I will have a look tomorrow. Too late for such a job
Mmmm is that so?
I will have a look tomorrow. Too late for such a job
- hecub
- Messages : 2528
- Inscription : lun. mai 05, 2014 3:13 pm
- Localisation : Ambassadeur Auray
- Contact :
Re: HOW TO : make the upper hole on the Allvator Front Wing
Yeah, if you look at a Curve you see that the hole in the front wing is made for the other one, the one closer to the mast:
I suppose it's the same result, it's just funny to choose differently.
I suppose it's the same result, it's just funny to choose differently.
Surf: Lethal foil 4'6
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube
Wing: Droïd 6-5 - Neutra 4, Cruzader Diamond 6'0
Foil: Sirus XXL - XL - L, Curve H XL - L - M
YouTube