A la dérive dans les dérives

Tout ce qui concerne les accessoires pour vous équiper et équiper vos planches.
Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » lun. juil. 04, 2011 8:44 am

Hi Coolas,
I use a scarfini truster on my JVB custom 6.6. I have also a st of FCS Sunny Garzia (yes, I kwow... it is a little bit large for my 70 kg). Scarfini is better. In Italy the price is almost the same than FCS.
Really great quality and carbon base !!!
ON market there are also quad scarfini set, but the price of thise english site is amazing.
I love also 12 cm central fin.
Look also at dolphin, cut and dolphin ct.. in almost all lenghts.


A question for my forum friends (and for master shaper Ours). ( I'm 170 cm X 70 kg).
What is the better set of fins for my (next and I hope soon :-) ) 9.0 Zero?
I have a couple of FCS GXQ . I think that are perfect for Zero. But for central fin?
I have also a FCS ezi trim 7.75, great drive, speed and manovrability, but perhaps a little bit long in every day use. 7.0 Ezi trim?
FCS 6.5 Kay Sallas?
FCS Ignition 7.25.
Other solutions?
Or is better two or most fins. 6.0 in micro waves , 7.0 ezi trimm in normal waves and 7.75 in big waves ?

Scuse me Patrice if this post isn't the right place for this general question :-)

Thanks.
Filippo :D
Dernière modification par fp1369 le lun. juil. 04, 2011 1:32 pm, modifié 1 fois.
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
Patsurf06
Messages : 4241
Inscription : ven. août 20, 2010 10:43 am
Localisation : côte d'uzure !

Message par Patsurf06 » lun. juil. 04, 2011 9:25 am

Good quality and look for Scarfini and nice price , sure .. thanks filippo :wink:

Colas , il n'y a pas de quad Scarfini sur le site british ... dommage les prix sont sympas en effet ..

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » lun. juil. 04, 2011 12:45 pm

Ciao Pat,
from this site You must buy two set of tri fin and make so a quad.
On official site scarfini You can read the right combination of set.
http://www.scarfinifins.co.za/index.php ... category=2
The price is in any case good (less than a FCS quad).
Ciao
Filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
Patsurf06
Messages : 4241
Inscription : ven. août 20, 2010 10:43 am
Localisation : côte d'uzure !

Message par Patsurf06 » lun. juil. 04, 2011 1:12 pm

ok philippo , really the best choice for the price , allright :wink: (about 80€ for 2 set of tri-fins + shipping )

And now the choice ... HX3 or HX4 ? 90 kgs and good leg-power for me :wink:
Dernière modification par Patsurf06 le lun. juil. 04, 2011 1:20 pm, modifié 2 fois.

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » lun. juil. 04, 2011 1:18 pm

Hello,
for me HX4, but I'm not sure :(
:D
Ciao
Filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
Patsurf06
Messages : 4241
Inscription : ven. août 20, 2010 10:43 am
Localisation : côte d'uzure !

Message par Patsurf06 » lun. juil. 04, 2011 1:20 pm

ok thanks :wink:

Colas t'en penses quoi ?

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Message par coolas » lun. juil. 04, 2011 1:41 pm

Je dirais HX4 aussi: vu la taille d'un SUP et les appuis que on dévellope avec la pagaie, je pense qu'il faut grand pour nos poids.

Avatar de l’utilisateur
pierem
Messages : 3395
Inscription : mar. juin 16, 2009 2:58 pm
Localisation : Ambassadeur Auray - Quib

Message par pierem » lun. juil. 04, 2011 2:02 pm

Patsurf06 a écrit :(about 80€ for 2 set of tri-fins + shipping )
d'où tiens-tu les prix ? J'ai trouvé nulle part, du coup je suis passé par le formulaire de contact...
:mrgreen:
Hipre Pro 5'3, 2023 Plus 6M, Neutra V2 5m, Plus V1 4m
Fluide XXL, YpraXL-S, Véloce L-T, stab Fluid H 45
Lethal 5'1 FspPro 47L.
Acidolly 8'4 EPS :mrgreen: Couine Marie 10".
Carbon Pro
Strutless 12m, Draw 9m, StrutWave 7m, Lethal 5'6.

Avatar de l’utilisateur
Patsurf06
Messages : 4241
Inscription : ven. août 20, 2010 10:43 am
Localisation : côte d'uzure !

Message par Patsurf06 » lun. juil. 04, 2011 2:23 pm

par là .. tu fais une simulation d'achat et ça t'affiche le prix en livres sterling (tu multiplies par 1.10 pour avoir en € ) :wink:

http://www.trioceansurf.co.uk/surfboards/surfboard-fins

Avatar de l’utilisateur
pierem
Messages : 3395
Inscription : mar. juin 16, 2009 2:58 pm
Localisation : Ambassadeur Auray - Quib

Message par pierem » lun. juil. 04, 2011 2:34 pm

Patsurf06 a écrit :par là .. tu fais une simulation d'achat et ça t'affiche le prix en livres sterling (tu multiplies par 1.10 pour avoir en € ) :wink:

http://www.trioceansurf.co.uk/surfboards/surfboard-fins
OK, je cherche pour un Set Quad :-) c'est pour ça que je ne me suis pas attardé sur triocean qui n'en a pas... :wink:

Merci
:mrgreen:
Hipre Pro 5'3, 2023 Plus 6M, Neutra V2 5m, Plus V1 4m
Fluide XXL, YpraXL-S, Véloce L-T, stab Fluid H 45
Lethal 5'1 FspPro 47L.
Acidolly 8'4 EPS :mrgreen: Couine Marie 10".
Carbon Pro
Strutless 12m, Draw 9m, StrutWave 7m, Lethal 5'6.

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » mar. juil. 05, 2011 1:34 pm

a little UP :-)

A question for my forum friends (and for master shaper Ours). ( I'm 170 cm X 70 kg).
What is the better set of fins for my (next and I hope soon :-) ) 9.0 Zero?
I have a couple of FCS GXQ . I think that are perfect for Zero. But for central fin?
I have also a FCS ezi trim 7.75, great drive, speed and manovrability, but perhaps a little bit long in every day use. 7.0 Ezi trim?
FCS 6.5 Kay Sallas?
FCS Ignition 7.25.
Other solutions?
Or is better two or most fins. 6.0 in micro waves , 7.0 ezi trimm in normal waves and 7.75 in big waves ?

Scuse me Patrice if this post isn't the right place for this general question :-)

Thanks.

:-)
Filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Message par coolas » mar. juil. 05, 2011 1:44 pm

Personally, I would tend to use big fins at slow speeds and small fins at high speeds. A bit like for sails or airplane wings: the faster you go, the less surface you need.

Also, I think narrow-tailed boards like the Zero do not need big fins.

So for me it is either a thruster configuration (all fins the same size) when I am in an agressive mood, or a big single fin on cool waves.
I didn't find a 2+1 configuration I like, but most people seem happy with 6" to 7" as main fin in 2+1

Avatar de l’utilisateur
Ours
Site Admin
Messages : 19800
Inscription : mar. juin 12, 2007 11:50 am
Localisation : La Baule / France
Contact :

Message par Ours » mar. juil. 05, 2011 2:08 pm

Hello,

notez que c'est encore plus flou que ça.

Par exemple une 17 souple "porte" moins qu'une 15 raide.
Une 19 étroite "porte" moins qu'une 16 large.
etc etc etc...

Sur un 2+1 ça a une importance cruciale de le savoir.

Pour moi l'utilité des dérives et quasi uniquement de créer de la vitesse en excès. On sait tous maintenant que les dérives ne sont pas indispensables à l'accroche (cf alaia, bodyboard, et autres trips).

Le rôle majeur de la dérive est convertir la force centripete en résultante "propulsive".
En clair, sans dérive votre planche tend à déraper dans les virages, vers l'extérieur du virage. En mettant une dérive ou plusieurs vous créez une résistance à cette force.
Cette résistance peut soit simplement résister, soit convertir l'énergie pour améliorer les qualités du surf.

Conversion de l'énergie :
- en vitesse : la dérive envoi la planche en avant.
- en portance : la planche s'allège au delà des caractéristiques de son shape.
- en accroche : la planche ne dérape pas.

Ces effets sont classés selon l'ordre d'importance décroissant que j'accorde à chacune.

Notez que bien souvent ces effets ont des contraintes qui limitent la maniabilité de la planche et sa vitesse naturelle. Prenez aussi en compte le tirant d'eau, la dangerosité etc...

Partant de là, vous avez une grille d'analyse plus claire de ce que vous devez choisir comme dérive.

Les règles sont multiples et toutes croisées. Mais si vous voyez clair dans ce que vous voulez obtenir, le choix est plus évident.

Merci.

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » mar. juil. 05, 2011 2:19 pm

Thanks Coolas :)
I like also this set FCS : http://www.surfsurfsurf.co.uk/longboard ... rd_fin_set
but I think (is only impression dreaming the outline and rocker of 9.0) that Caribou Zero performs better with a longer central fin (6 to 7) (nose and rail to rail performance).
On my (less) experience the fin is influenced by waves (small waves = small fins (loose and agility) and big wave = big fin (drive and control). I could try same different set, but I like to know your and Patrice's advice to avoid to spend time and money to try right configuration :-) (and, now, I haven't the first and most important thing: Caribou Zero :D :D ).

Filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Avatar de l’utilisateur
fp1369
Messages : 1270
Inscription : mar. janv. 19, 2010 5:46 pm
Localisation : South Italy

Message par fp1369 » mar. juil. 05, 2011 2:28 pm

Thanks Patrice,
But now, I don't know which fin I must buy.. :D :D

I love this (for example) http://store.magicseaweed.com/Future-6.0-Fin/Item/2622/

Ok, I will test same set and same configurations and I will have a fin's collection in my quiver. :) :)

Filippo
one xtr 6.4, one vector 6.8, one proto pro 2017, fatal xtr 99, fatal pro 2017 6.10 and 7.1,mob proto 7.2 x 80 lt, proto curve 7.4 xtr, zero pro sp 2018, couine marie 10.6.
carbon pro and carbon surf-Salt Paddle Kenu and palika

Répondre

Revenir à « Les accessoires »