souci sur une curve green XTR

Tout savoir pour réparer tout seul / All you need to know to DIY.
Avatar de l’utilisateur
giacomo
Messages : 457
Inscription : jeu. nov. 13, 2014 4:18 pm
Localisation : Pisa - italy 65kg (probably?!?!?!)

Re: souci sur une curve green XTR

Message par giacomo » lun. nov. 14, 2016 6:11 pm

ok, i will buy 3 meters almost.

and what do you think about epoxy resin E-227? is ok?
Zero 8'5 FSP - Mob 7'2 FSP2X - Freak 9'2 xtr - Rage Panther Ocean 12'6 xtr - Eternity Caribou 8'8
2x carbon pro 7 - carbon pro 8

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: souci sur une curve green XTR

Message par coolas » lun. nov. 14, 2016 6:36 pm

giacomo a écrit :epoxy resin E-227? is ok?
I do not know it. from the manufacturer site http://www.prochima.it/e-227.html the E-226 and E-228 may be better as their cure time is 6 hours (to wait before sanding) for a pot life of 25 or 30mn, whereas the E-227 has a cure life of 12 hours for a pot life of 35mn. The E-226 is more fluid, may be better for repairs?

But I cannot find if they are UV-resistant. Not a big issue on boards that are painted afterwards, but important if not painted or with a brushed look. But since they recommend them for surfboards, they should be.
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

ledudu
Messages : 604
Inscription : jeu. avr. 26, 2012 10:06 am
Localisation : bassin arcachon, Biscarrosse

Re: souci sur une curve green XTR

Message par ledudu » lun. nov. 14, 2016 6:46 pm

la réparation...
du PVC à l'interieur
Image
de la résine chargée pour bien préparer puis 3 couches de carbone
Image
ponçage, glaçage, un peu de peinture et c'est reparti pour de nouvelles aventures...
Image
Dernière modification par ledudu le mar. nov. 15, 2016 9:37 am, modifié 1 fois.
Surfing is a life, the rest is detail

Avatar de l’utilisateur
giacomo
Messages : 457
Inscription : jeu. nov. 13, 2014 4:18 pm
Localisation : Pisa - italy 65kg (probably?!?!?!)

Re: souci sur une curve green XTR

Message par giacomo » lun. nov. 14, 2016 6:48 pm

wow, nice!

@coolas: this one?
http://www.shaper.fr/epoxy_resoltech.html
Zero 8'5 FSP - Mob 7'2 FSP2X - Freak 9'2 xtr - Rage Panther Ocean 12'6 xtr - Eternity Caribou 8'8
2x carbon pro 7 - carbon pro 8

Répondre

Revenir à « Comment réparer / How to repair / Vos soucis sur le matos »