Nouvelle usine au Portugal

Tout ce qui concerne le GONG shop / All about the GONG shop.
Avatar de l’utilisateur
Ours
Site Admin
Messages : 19800
Inscription : mar. juin 12, 2007 11:50 am
Localisation : La Baule / France
Contact :

Re: Nouvelle usine au Portugal

Message par Ours » mer. sept. 28, 2016 9:05 am

Hello,

in addition to the previous post, the factory is not open to visit. Employees only.

Thanks,
GONG owner and shaper

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: Nouvelle usine au Portugal

Message par coolas » mer. sept. 28, 2016 11:54 am

Also, if you travel by road, you could have the board delivered to a warehouse "dépôt" in a French town you go trhough...
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

DAVE WAVE
Messages : 2
Inscription : ven. sept. 23, 2016 3:57 pm

Re: Nouvelle usine au Portugal

Message par DAVE WAVE » mer. sept. 28, 2016 10:08 pm

Ours a écrit :Hello,

in addition to the previous post, the factory is not open to visit. Employees only.

Thanks,

Thank you for your quick answer , i order yesterday a 9'1 cloud pro at you webshop and received a mail today from gong sup shop that it will be send soon to Belgium , i hope it will be arriving within 2 weeks so ik can use it in Portugal

looking forward to it

Beste regards
Dave Van Herck

Avatar de l’utilisateur
Ours
Site Admin
Messages : 19800
Inscription : mar. juin 12, 2007 11:50 am
Localisation : La Baule / France
Contact :

Re: Nouvelle usine au Portugal

Message par Ours » mer. févr. 08, 2017 7:43 pm

Hello,

pour faire suite à ce sujet, parce que c'est une dynamique sur le long terme, les chiffres GONG 2016 montrent une progression de +600% des achats dans la zone Euro contre +1% en Chine.
Vous voyez que notre direction est franche : relocalisation.

Notez que ces +600% ne partent pas de zéro puisque nous achetions déjà des planches en 2015 en Europe et surtout tous les accessoires FCS, Creature, Dakine notamment, dont nous sommes de très gros clients.

Vous nous avez fait confiance, dans les bons moments comme dans les moins bons. Merci.

Nous avons toujours du retard sur les volumes produits au Portugal, avec une capacité de production équivalente au quart de nos besoins. Passer de 100 planches produites à plusieurs milliers est un challenge mais aussi un casse tête. Le principal étant de trouver les composants puisque la croissance de capacité de production n'est malheureusement pas suivie par une croissance de stockage des fournisseurs de fibre, de résine etc...
On se trouve donc très souvent dans l'impasse, devant attendre que la marchandise arrive.
Nous pourrions en stocker plus en achetant en très grosse quantité pour éviter ces ruptures, mais grossir très vite demande une trésorerie considérable. Y ajouter ce poste n'est malheureusement pas possible. Il faut gagner de l'argent pour le réinvestir et ainsi de suite...

Néanmoins de très nombreux clients sont ravis de leur planche et nous livrons chaque jour une petite dizaine de planche partout en Europe, ce qui est un rythme honorable, bien loin d'une sensation de stock vide. Ceux qui passent nous voir savent (puisque je leur montre) que nous avons en moyenne 800 planches en stock à cette saison. Nous faisons donc les choses pour que vous soyez servi dans les temps les plus raisonnables.

Merci à toutes et tous.

To follow up on this subject, because we are in it dynamically for the long term, the Revenues here at GONG for 2016 have displayed a progression of +600% concerning purchases made within the Euro Zone as opposed to +1% in China.
It should be obvious that our direction is manifest : Relocation.

Make note that this +600% number does not come from Zero because already in 2015 we were buying Boards in Europe and especially all of our accessories like FCS, Creature and Dakine, to whom we are big customers.

You all have entrusted us with your confidence, in the good times and also in the bad. And for this we sincerely thank you.

We are still experiencing some delays with the quantities of our products from Portugal, whom have a capacity to produce equivalent to 1/4 or needs. Going from producing 100 Boards to a couple thousand is not only a challenge but bold task to take on. The most important being in finding the necessary components because the capacity for growth unfortunately could not catch up to the capacity to re-stock from distributors such a s fiber, resins, etc……
So we have found ourselves more often than we would like in an impasse, and waiting for the merchandise to arrive in a timely manner.
We could stock up by buying in mass quantity in order to avoid stock ruptures, but rapid growth requires deep Treasury pockets. And for the time being that is not an option open to us. We must make money in order to re-invest and so on and so forth……

However we do have numerous clients whom are thrilled wit their Boards and everyday we are capable of sending out a dozen Boards a day throughout Europe, which is an honorable rhythm, far from the feeling of having an empty stock. Those who come by to see us know (because I show them) that we have at least 800 boards in stock this season. And we are doing all that is in our power in order to serve you within the most reasonable time frame.

We thank you all, not only for your loyalty to GONG but for your unrivaled patience!
GONG owner and shaper

Avatar de l’utilisateur
Ours
Site Admin
Messages : 19800
Inscription : mar. juin 12, 2007 11:50 am
Localisation : La Baule / France
Contact :

Re: Nouvelle usine au Portugal

Message par Ours » ven. mars 24, 2017 10:55 am

Hello,

nous poursuivons notre dynamique de rapprochement entre nos productions et vos utilisations.

Après avoir ramené le haut de gamme de notre production au Portugal, nous avions fait évoluer notre sourcing de résine pour travailler avec des résines Françaises produites par Sicomin. Le résultat est super, avec un gain sensible en dynamisme sur l'eau.

Nous travaillons de plus en plus avec des produits propres et locaux comme le liège. Nos récentes gammes de kite sont topissimes. On a le coté écologique certes, mais le comportement est aussi beaucoup plus doux. A ce jour aucune planche n'a cassé. Hallucinant car c'est très léger.

La dernière évolution actée est le passage sur du carbone 100% français. Le fil est fabriqué en france par Toray dans le 64 et tressé par Chomarat dans le 07. Le carbone reste un élément parmi les plus polluants dans notre production, mais un usage raisonné et un sourcing local sont un énorme plus.
Comme pour la résine, nous disposons des certificats qui attestent de nos bonnes pratiques.

Enfin, nous prototypons des nouvelles technologies double sandwich 100% locales et vertes. Plus d'infos dans quelques mois après nos phases de tests.

On avance bien et dans le bon sens je crois.

We continue to dynamically develop closer ties between our production and your usage.

After having taken our High End Range to Portugal for production we have now evolved our sourcing of resin in order to work directly with the French Resin Company Sicomin. The results have been off the hook with dynamic gains on the water.

We are working more and more with Localized products such as Cork. And our latest Kite board designs are fantastic. We are at an advantage in the Ecologic sense but also the feeling of the boards are even more supple. Up to today there hasn’t been one broken board. Mind-blowing because it is in fact incredibly lightweight!

The last right of passage performed is passing over to 100% French made Carbon. The thread is fabricated in France by Toray in Basque Country and woven in the Ardeche Region. The Carbon is an Element that causes the most pollution in our construction, but by in-sourcing it adds a big positive on our imprint. As with our Resin we can offer Certification that attest to good ecological practices.

We are in the midst of prototyping new double sandwich technologies which are 100% Local and Eco-Friendly. More information heading your way in the upcoming months after our testing phase.

I do believe we’re moving forward well and in the right direction.

Thank you for your support!


Merci.
GONG owner and shaper

fredkite
Messages : 145
Inscription : sam. nov. 14, 2015 6:15 pm
Localisation : Nord Médoc

Re: Nouvelle usine au Portugal

Message par fredkite » sam. mars 25, 2017 2:17 pm

Félicitation pour votre engagement :P .

Une entreprise qui se bouge fait tjs plaisir surtout quand elle va dans le bon sens.
Je suis Fan de vos produits et de votre esprit. :lol: :lol: :lol:

Fred
Pie 6'11 PU
-----------------------------------------------
* Si ta combinaison est sèche, c'est que tu ne surfes pas assez
* La tristesse de casser sa planche et vite remplacée par l'achat de la nouvelle

Avatar de l’utilisateur
MagW
Messages : 1270
Inscription : lun. sept. 17, 2012 9:57 pm
Localisation : Sweden west coast

Re: Nouvelle usine au Portugal

Message par MagW » sam. mars 25, 2017 7:28 pm

Double sandwich!?!?
What kind of board is the double sandwich planned for?
/Magnus
22: NFA9'xs
21: NeverStick 9'8
20: Zero 8'5
19: 7'8 Karmen Pro
13: Sherpa BR 12'6
Carbon Racing S and Pro 7"
23: Mint 5’, HM85, CurveH-XL, H-L, FluidH45
23: Droid UP 4,5 & 5,5

Avatar de l’utilisateur
Ours
Site Admin
Messages : 19800
Inscription : mar. juin 12, 2007 11:50 am
Localisation : La Baule / France
Contact :

Re: Nouvelle usine au Portugal

Message par Ours » lun. mars 27, 2017 9:48 am

Foil boards :wink:
GONG owner and shaper

Répondre

Revenir à « Le shop GONG »