Kite board fatal 5.0 vent screw

All you want to know about kite boards, official topics
marcraga1902
Messages : 17
Inscription : jeu. août 08, 2019 6:12 pm

Kite board fatal 5.0 vent screw

Message par marcraga1902 » sam. août 10, 2019 7:25 am

Hi everyone

One question, I own a kiteboard fatal 5.0 which I´m very happy. My question is when I let it in the car (high tempertures)should I loose (afluixar)the screw to avoid the presure to breake the board? In the old times we do it with windsurfing boards when it was too hot or me took a plane.

Thank you

Avatar de l’utilisateur
coolas
Messages : 14929
Inscription : lun. août 10, 2009 1:24 pm
Localisation : Ambassadeur Seignosse, 1m67, 97kg
Contact :

Re: Kite board fata 5.0 screw

Message par coolas » sam. août 10, 2019 9:58 am

Never touch the vent.
These are Gore-Tex vents, automatically letting through air but not water.
But they are quite delicate, you can break them easily trying to unscrew them.

From time to time just rinse them - without touching them - to avoid sand, mud, or salt buildup
2019: 7'3" Fatal 105L, Alley 7'8" 105L & 8'1" 120L, Zero 9'0" 115L
2022: Mob 7'6" cool 120L, Alleys custom 7'10" 112L & 8'1" 114L
2023: Karmen custom 7'11" 118L
Surf: 9'1" XTR proto glider

marcraga1902
Messages : 17
Inscription : jeu. août 08, 2019 6:12 pm

Re: Kite board fata 5.0 screw

Message par marcraga1902 » dim. sept. 01, 2019 4:42 pm

Thank you very much :-)

Répondre

Revenir à « "Tout savoir sur les planches de kite", les sujets officiels »