HOW TO : install your pad

Tout savoir sur comment surfer / All you need to know about how to surf.
WillySUP
Messages : 273
Inscription : mer. juin 17, 2015 9:50 am

HOW TO : install your pad

Message par WillySUP » mer. déc. 06, 2017 11:56 am

Comment installer son pad ?

1) Nettoyer/dégraisser la zone avec un chiffon (si vous utilisez un produit car la planche n'est pas neuve et a déjà été waxée, n'utilisez surtout pas d'acétone mais plutôt de l'essence F).
2) Checker la position : à proximité directe du plug de leash.
3) Coller la partie centrale.
4) Coller ensuite les deux parties latérales.
Et voilà !!!

Points clés :
- Moduler l'écartement des trois parties du pad en fonction de la largeur du tail de votre planche.
- Ne pas hésiter à appliquer une forte pression, notamment sur le kick, afin que le collage soit durable.

How to install the Pad ?

1) Clean /degrease the zone with a clean rag (If you are using a product because the Board is not new and has already been waxed, be sure NOT to use Acetone, it would be better to use something like Essence F).
2) Check the position : just above the Leash Plug.
3) Stick down the Central part.
4) Align and stick down the Lateral parts.
Voila!!

Key points :
- Be sure to place the separate parts of the Pad in function with the width of the Tail of the Board.
- Do not hesitate to apply heavy pressure, especially on the Kick, in order to achieve solid and durable adhesion.


Advisor : Patrice Guénolé et GONG Surfboards.

phpBB [video]

Revenir à « SURF : Comment surfer / How to surf »